<< 摔車 | 回blog首頁 | Nuforce Icon Miniamp & S1 speakers >>

August 31,2008

Nuforce V2

2007 Nuforce 推出了第二代功率擴大機電路板V2, 取代了前一代的電路板, 電路的基本架構不變, 但改了一些工作點的設定, 讓擴大機更穩定, 雜音更低, 而且效率也提升了, 瓦數比以前大, 音質上也有長足的進步. V2在開發階段時寄給Casey作聲音上的評估, 但Casey遲遲沒有回覆, 我還以為他對聲音不滿意, 或是實驗版燒了. 過了一個禮拜, 我忍不住問Casey V2的聲音如何, 他說他最近在忙著聽, 沒時間回覆, 因為聲音太棒了, 想把所有的軟體都聽一遍, 他還拿了V2的實驗版去另一個發燒友家裡試聽, 那人聽了之後像是恍神般說Much better, much better, much better...連說了十秒鐘!

V2 隨即被用來做升級套件, 凡是Nuforce以前的用戶都可以非常合理的價格把前一版的放大電路板換成V2.

新用戶則可以選擇買第一代的產品或V2, 但過一陣子就發現沒有人買前版, 所以V2就算正式上市了.

V2在4歐姆的情況下可以連續輸出290W, 驅動能力非常驚人. 可以輕鬆推動B&W, PMC 等難推的喇叭. V2板用在IA7綜合擴大機, R8, R9 單聲道後級, 以及MCH 多聲道家庭劇院後級.

Posted by dalunyuan at 樂多Roodo! │17:22 │回應(26) │引用(0) │Nuforce
樂多分類：日記/一般 工具：編輯本文
Ads by Roodo! 

引用URL

http://cgi.blog.roodo.com/trackback/7079941
回應文章

大倫兄，
現在哪裡有得試聽NuForce R9 V2?
它的功率如何?

小弟住桃園
Posted by maxist at September 25,2008 21:09

可以打電話跟我約時間0917208000
R9 V2 290W@4ohm
Posted by 袁大倫 at September 26,2008 09:14

大倫兄，
這兩天有空再聯絡您，
R9 V2 SE若拿來bi amp推中高音不知合適否(另一台為晶體機)?
實售價為多少 ?
若不方便版上告知，煩寄至我信箱...
Posted by maxist at September 28,2008 23:48

大倫兄 您好:

弟是上次在myav詢問您後級單端/平衡切換的那位
不知南部有沒有機會聽聽看R9 V2 SE?
Posted by john at September 30,2008 11:18

南部可以跟高雄首都的 陳雨亭 接洽
不過現在他們沒有R9 V2 SE
約好後我可以寄一對下去
Posted by 袁大倫 at October 2,2008 05:41

大倫兄：

嘉義有無配合的展點呢？謝謝！
Posted by john at October 2,2008 10:17

抱歉 嘉義還沒有配合的店家...
Posted by 袁大倫 at November 3,2008 17:13

您好 我對NuForce的擴大機很有興趣 家裡的喇叭是國產亞瑟BE-10 請問若IE7-V2來推適合嘛？或有其他NuForce型號的擴大機適合 謝謝
Posted by PETER at February 8,2009 22:36

IA7 V2 毎邊一百瓦 應該可以遊刃有餘
Posted by Dalun Yuan at February 9,2009 21:24

袁先生你好

請問哪裡可以有機會接觸到貴公司產品?
因為我想要增添V2當後級,不知道是否適合?
音為我用的喇叭是雅瑟,遽聞這喇叭需要大功率推才會好聲,所以想請教袁先生.

謝謝
Posted by jack 鄭 at March 27,2009 11:29

可以打電話約時間試聽0917208000
Posted by Dalun Yuan at March 29,2009 12:29

請問一下大倫兄：

8月份音響展有參展嗎？
Posted by Lee at July 8,2009 11:14

No, I am not go to have a room, but I definitely will visit the show.
Posted by dalun yuan at July 10,2009 15:55

ok, i see. I subjectively presume these tiny boxes can have good result with my speaker-Vienna Acoustic Strauss, since on TAS, VA Mahler v1.5 was driven by them during the audition. And because of green house effect and my large demand on music listening, i definitely would give it a try some day. What i need now is to "ear"witness their performance.
Posted by lee at July 12,2009 21:05

call me at 0917208000, we can arrange time for listening session in your place. Give Nuforce a chance!
Posted by Dalun Yuan at July 13,2009 09:14

thanks! I'll check my schedule and return your call.
Posted by Lee at July 17,2009 14:38

Hi Mr. Yuan,
What is the upgrading price of Ref9 v2 --> Ref9 v2 SE?
Posted by Luo at July 31,2009 00:20

The list price is NTD45000/pair and I have a very good discount now, call me at 0917208000 to talk about it.
Posted by Dalun Yuan at August 3,2009 08:40

請問一下大倫兄：
我之前從Bica買了第一批IA7，後來也送去通化街升級，到現在還是放在臥房天天使用，很超值聲音細緻。
後來又跟網友買了Ref8B，應該是他從美國帶回的。
不知道如果想升級Ref8B V2，不知道要花費多少？謝謝！
Posted by Robert at September 6,2009 17:51

Time flies..Too occupied on Summer Vacation. Heard from audiocircle that V3 has already been released. Any news in Taiwan?
Posted by Lee at September 24,2009 23:12

The upgrade for 8B to V2 is 24000-NTD. V3 is coming up, we have early production now. Full production on mid Oct.
Posted by dalunyuan at September 28,2009 13:11
私密回應
Posted at September 29,2009 16:04

V3 is different on smoothness and details. It is well balanced on tonal quality. By the comments from the US and Japan, V2 is more dramatic (or you can say more dynamic) and V3 gives a sense of stability. I would recommend V3 of course, since it is the result after 6 months of my study and research!
Posted by dalunyuan at September 30,2009 19:26
私密回應
Posted at October 1,2009 13:44

The V3 has SE version and non-SE version. Nuforce prices have been always very reasonable, NTD198000- and 138000- for a pair of mono-mono 300W power amps. I can provide a little discount but we need to talk to decide.
Posted by dalunyuan at October 5,2009 13:46
私密回應
Posted at October 23,2009 02:59


回最上方