<< 【PE新貨】Joe World PE新貨 | 回blog首頁 | 【模艦活動】聯合艦隊大本營2005觀艦式 >>

August 8,2005

大建的工法4 -- 補土製圓點防滑甲板

大建的工法 4
A+B補土仿製防滑甲板
又是一個旁門左道^^
用來對付不規則型甲板舖設面
加減看看^^




壓印時可使用雕塑工具輕輕壓在金屬網上
可以讓圓點凸起更均勻

此例運用在長門乾舷(下層副砲甲板)的防滑甲板
省去拼貼PE片的痛苦,還無接縫,很是快樂^^
還想不到仿造人字防滑甲板的工法哩....


Posted by jeff5743 at 樂多Roodo! │18:59 │回應(10) │引用(1) │My Tips 大建的工法
樂多分類：嗜好 共同主題：模型工法 工具：編輯本文
Ads by Roodo! 

引用URL

http://cgi.blog.roodo.com/trackback/352374
引用列表:
引用一下！！！！！！！
数据恢复【数据恢复】 at April 5,2006 16:49
回應文章
大建長官艦技廠技術力已達255
又是個絕妙好招,下官抄收
Posted by 聯合艦隊大本營 at August 8,2005 20:09
妙招耶～讚！
非常期待看到大建兄展現「長門」的榮光與氣魄！！
Posted by Pochi at August 8,2005 23:33
人字形也可以拓印，只不過要先找到合適的型版或是其它印有人字形的素材！！！
Posted by laisr at August 9,2005 07:37
好招!

说起来.好像VM有一宽战车的PE可以漏人字行哦!等一会儿去看看!
Posted by aprstar at August 9,2005 08:37
大建兄真是天才, 頂
加油

Posted by Rabrus at August 9,2005 09:39

To:大本營長官
疑~"技術力指數"好熟悉的用語啊
是"怒海激戰"或"坩碧的艦隊"?
不意長官亦熟此道^^
下官的怒海已被兒子接收了,殘念^^

To:Pochi大
長門的確見證了IJN的興衰
聽您這麼說,更惶惶不可終日哩
游至宏前輩聽聞小弟長門動工也勸小弟,
把長門當作多年後的巔峰關門作....
唉~當初不知死活答應了阿良哥哥
現今,頭都洗了,就闖下去吧!

To:Laisr兄
下回您再到太原路尋寶時
能否幫小弟留意可用的素材:
1.1/700錨鍊
2.0.1mm以下銅線
3.薄銅片
感激您!!!

To:aprstar兄
期待您開發出人字防滑板的替待招數
敬候佳音^^

To:Rabrus版大
好可愛的動畫耶!!版大果然是PHP鬼才
給您這一頂,精神又來了^^
Posted by 大建 at August 9,2005 10:42
大建兄：
這種工法怎麼能說是旁門左道呢？
做模型本來就是一種腦力激盪，如何施工，來達到預期效果，是一種藝術！
美國人士還使用一種莊臣公司的木質地板腊（Futrue）來讓飛機透明艙罩「閃閃動人」之法，甚至還研究用此物來取代透明漆！
至於這種工法，個人在一本「Intermediate military Vechicle Modelling」（PS:Osprey Modelling Manuals Series No.5）中看過一篇"Non-slip treads and liguid plastic"（該書第36頁）看到類似工法，只不過他是將廢膠架以溶劑（硝化纖維溶劑）溶解成濃稠狀，再薄薄的塗佈在蝕刻片上，待乾燥後取下，在切成適當大小，黏在車輛模型上當防滑板，這部分提供大建兄參考。
Posted by sun at August 15,2005 16:42
大建兄
仿造人字防滑甲板可以用铝箔，先用铝箔复制防滑纹，在把铝箔粘在舰体上。粘好后用笔刀去除多余部分。铝箔超薄基本没落差，但粘起来比较困难。完成之后效果和pe无异。
Posted by caesar at February 7,2006 22:46
Jeff,

Your modelling of 1/700 ships is absolutely awesome. Your Nagato has inspired me to try to duplicate your efforts. I have the kit and some base photo etch but I can't seem to locate the perforated sheet used in this article to simulate the deck pattern on the A + B Putty. I believe you also used this same material just under the blast bags on the 16" guns.
Can you tell me where it is available?
Many thanks and keep up the excellent work.

Regards,

Neil Craig
Posted by Neil Craig at August 31,2006 23:19
Dear Neil Craig,

Thanks for your appreciation.

I used A+B putty in 3 ways on Nagato
1. to simulate the dot pattern antiskid deck, the area is on lower deck in front of 14cm barbette.
2. to simulate the anti-blast bag, using on 40cm and 12.7cm barbette, also on the bridge. I used iron ruler to roll A+B putty into a thin rope.
3. to simulate the sand bag, using on adding machine guns.
You can check these on the Nagato galley of my blog.
http://blog.roodo.com/duroyal420/archives/490755.html

I highly recommend " 3D CG IJN Battleship Nagato", I follow this book to detail-up my Nagato. You can find this book on Hobby Link Japan.
http://www.hlj.com/product/FTB47737

Hope can see your Nagato soon.^^
best regards,

Jeff
Posted by 大建 Jeff at September 1,2006 07:45


回最上方