<< 【製作誌】1/700 IJN CL KASHIMA 鹿島 1941-- Part II | 回blog首頁 | 【製作誌】1/700 IJN CL KASHIMA 鹿島 1941-- Part IV >>

August 29,2006

【製作誌】1/700 IJN CL KASHIMA 鹿島 1941-- Part III

1/700 IJN CL KASHIMA     
鹿島 1941 製作誌 -- Part III

主要的上層結構完成 !
Major superstructure has done !



Posted by jeff5743 at 樂多Roodo! │23:16 │回應(22) │引用(0) │In Progress 製作誌
樂多分類：嗜好 共同主題：模型製作誌 工具：編輯本文
Ads by Roodo! 

引用URL

http://cgi.blog.roodo.com/trackback/2081660
回應文章
一個小小的願望
能請大建兄簡介這艘船嗎?

真的覺得這艘船越看越好看


(突然覺得自己很容易第一個看到大建兄的留言)
Posted by 小M at August 30,2006 00:59
喔~喔~來了~型出來了!
真的很有味道啊!!
看來大建兄似乎不需要那線圖了...^^||
真好!在這疲憊的深夜,還能享受這精彩萬分的演出.消除疲累的效果比洗三溫暖還有用啊~^^~

另外,報告一個發現到的小問題.
艦橋後面2舷的探照燈,平整面是燈罩面,圓弧面則是背面.所以平整面往外比較好點.這組探照燈看起來應該不是P社的產品,應該是三社共同的吧?外型上近乎60CM探照燈的正確構型(憑印象啦..^^||).可惜那燈罩面刻模過於平整,沒有做出燈面的效果,大建兄要不要比照慣例鑽孔,再點上玻璃製造液啊?效果應該會更棒的~^^~
Posted by Ralph at August 30,2006 02:45
Bravissimo Master Jeff!
(...........if Ralph write in chinese I write in italian ..........)
(ps: Jeff, please, can you tell us the items use for this stepp III?)
ciao
Lorenzo
Posted by Lorenzo Pomini at August 30,2006 17:00
WOW！
速度真快！幾近全自製的大工程居然如此迅速！
Posted by Pochi at August 31,2006 01:48
To:小M兄
這些輔助艦艇真的很耐看厚^^
Ralph兄與我都愛這些幕後英雄
關於實艦的介紹,不用我來班門弄斧啦
先前松尾明兄介紹的網站資料中
就有很詳盡的說明
您可前往參看
http://blog.roodo.com/duroyal420/archives/2048091.html
Posted by 大建 at August 31,2006 07:22
To:Ralph兄
能讓您快樂,我也很快樂^^
那個探照燈老是出錯(好像以前都作錯啦^^)
昨天試著要拆下,無奈防滑甲板太薄,這一拆可能就扯下一大片!
有點捨不得哩
如果真拆不下來,到時就請睜一隻閉一隻眼囉^^
塗不出像您一樣的木甲板耶!奮鬥中

To:Pochi大
好久不見^^
每次看見您,就提醒自己是不是又漏買了"次元艦隊"^^
因為兩隻兒子開學啦
終於能有較完整的時間可運用
就一路很快樂的做囉^^
Posted by 大建 at August 31,2006 07:31
Dear Lorenzo

I try,
1.mast -- LionRoar copper beams 0.5/0.4/0.2mm
2.rail -- LionRoar LE700025 IJN Railing III
3.catapults -- LionRoar LE700018
4.plate -- LionRoar LAM013 antiskid plate VI
5.doors & hantches -- Voyager AP044 and WEM PE729
6.brass pipe -- Voyager brass pipes 0.35/0.4mm
7.25mm twin gun -- Finemolds AM08
8.plastic parts replace -- Pit-road IJN equipment set
Posted by 大建 Jeff at August 31,2006 07:39
有點疑問,大建兄的艦橋下層結構很複雜(後備機翼也掛上了),對上色工序相信會有些障礙,尤其上甲板色及軍艦灰的分色遮蓋,相信會很考耐力 :-)
Posted by 松尾明 at August 31,2006 10:31
to:松尾明兄
僅有煙突部份是黏死了
其他都是假組上去的^^
到時會分別上色
至於上甲板亞麻油布色,一向都慣用筆塗
這些都已處理完成了
改天po進度,再請您多多指教^^
Posted by 大建 at August 31,2006 12:16
Dear Lorenzo
I think it's very difficult to write in Italian by people who come from non-Eurolanguage country.Most of Asian major in mother tongue and English.Not at all in other phyla,especially Eurolanguage .Jeff will be really killed if write in Italian.So let him easier to build model and teach us more skills attentively.I think that will be lucky for us all.^^

Maybe you could translate Jeff's English-words to Italian,and produce Jeff with his pro-skills for Italian modellers under Jeff's authorisation.^^
Posted by Ralph at August 31,2006 19:28
大建兄
探照燈方向那是小問題,整體才是重要的.您一向擅於掌握整體的美感,這一點小事情是無礙的,就別拆了吧~^^~
Posted by Ralph at August 31,2006 19:32
前輩你好!
我之前主要是玩汽車模型..
看你們這樣子玩真的讓我目瞪口呆...
好作品真的能夠刺激他人的製作慾望...
現在也想玩玩船艦模型...
有個疑問請教一下..
船艦模型的上色是在全部零配件組裝完成後才進行嗎?
甲板與艦身何者先上色..
甲板上的結構物那麼的複雜..
遮蓋起來不就得花很多時間?
Posted by 阿傑 at August 31,2006 20:25
看大建前輩的造艦過程!!好驚人喔!!.....(呆望中)
果然要完成一艘船艦模型是要下極大的苦心的!!
真是太利害了!!!!!
另外想要斗膽請教一下大建前輩!!
那個煙囪上那個一圈圈很像欄杆的東西是用蝕刻片作的嗎?
(我用漆包線不好用)
什麼樣的蝕刻片呢??要鑽洞黏嗎???
是不是跟您之前作驅逐艦砲塔還有魚雷發射器上面欄杆的做法一樣呢??
我看了您之前驅逐艦那篇是說用欄杆蝕刻
可是我還是找不到類似那種的!(是不是把正常欄杆切成一半呢在黏上呢??)
請您解解我多年的疑惑吧!!
Posted by 初心者 at August 31,2006 21:01
To:初心者(是哪個線上遊戲啊^^),您好

稱前輩實不敢當,大家都是模道中人,別客氣啦

這些煙突,砲塔,魚雷發射器..的護欄
正如您所言,是由正常的欄竿切下來運用的
以IJN三欄式欄竿,上下可切出兩條,只留下中間一條像魚骨的欄竿

目前常看見的欄竿PE,大分為兩類
1.銅質 -- 外觀黃色,質地較軟,較容易彎出圓弧,廠牌多為歐美老牌(GMM,Tom's,WEM..等)
2.不鏽鋼質 -- 外觀色銀白,較硬,彎圓弧需多試幾次,廠牌為獅鳴,沃雅及日系廠牌

一般取用欄距較窄的欄竿來施作
(有較多的支柱可供定位,也較符合實艦的視覺感)
以0.2mm手鑽鑽出幾個定位點
(不用全鑽,粉累的^^,以吃力點優先,如圓弧的兩端)
插入定位點的支柱,稍為留長一點
瞬間膠固定,這樣就能經得起噴漆及舊化的摧殘囉

建議您先選較粗的欄竿來試作
(如:獅鳴最早推出的IJN欄竿)
抓到折彎的手感後,再邁向細欄竿

預祝您 建艦愉快^^
Posted by 大建 at August 31,2006 21:35
嗚~~嗚~~~
知我者,Ralph兄是也!!
感心中......
Posted by 大建 at August 31,2006 21:37
To:阿傑兄
歡迎下海喲^^
關於上色順序的問題,以我自己的經驗而言
就是能省事就不要自找麻煩^^
會根據每艦的不同構型,推敲出最省事的施作手順
請您移駕http://blog.roodo.com/duroyal420/archives/2088992.html
當中可發現前後艦橋都已將細節及欄竿黏上(以不妨礙後續筆塗為原則),
且是與艦身分離上色的(因有內外層結構)
但艦身上卻無欄竿(欄竿需待前後艦橋固定後,才能黏準)
艦身的欄竿就會先上好色,留到較後面的步驟再黏上
還好日艦的塗裝,相對較單純
真正需要遮蓋的時機及難度不高
這也是為何我不敢碰歐美艦艇的原因^^
Posted by 大建 at August 31,2006 21:52
結構造型的平衡感都處理的很棒,越來越讓人期待嚕~ :)
Posted by gf13_001nhii(魔星) at September 1,2006 00:25
To: Jeff
thank you Master Jeff for your reference.
I am happy that you disclose your secret
anchors thanks for your gentleness and availability
ps: I think that the other modellers want to have these indications on the materials used by you
ciao
Lorenzo
Posted by Lorenzo Pomini at September 1,2006 03:09
To: Ralph
I love to joke, and therefore you take my last words with lightness.
when I tell Jeff to write in Italian, it is a delicious way to thank him for his art: I don't find other modeller so available and generous to explain their secret and to show their art................. for this I say ................... you could also write in Italian............... it is a way to say............... BRAVISSIMO !!!!!
in Italy it speaks only in Italian, and ours is not an easy language to learn.................. also for Italians!!!!
.............. but if you write in taiwan language, I tell that I write in Italian, because I cannot know your language.
hi Ralph, happy modelling
Posted by Lorenzo Pomini at September 1,2006 03:13
To: Lorenzo
My dear friend, without your urge and remind, I can't improve my English. Let me take your passion into my work!
Posted by 大建 Jeff at September 1,2006 07:56
Jeff
You have all passion in you, you are a modelling lover.
You take us an addition of modelling passion.
Thank you for all.
ciao
Lorenzo
Posted by Lorenzo Pomini at September 1,2006 17:58
Jeff
You have all passion in you, you are a modelling lover.
You give us an addition of modelling passion.
Thank you for all.
ciao
Lorenzo
Posted by Lorenzo Pomini at September 1,2006 18:00


回最上方